Bush Tool - Spring Suspension HGV Part No. 7432

Product Video

Bearing Bush Tool Spring Suspension HGV
Bearing Bush Tool Spring Suspension HGV

Typical Price:

£1619.26 exc VAT
£1943.11 inc VAT

For bushes in HGV spring suspension, supplied with a 12 tonne hydraulic cylinder suitable for use on the vehicle.

Additional Information

  • For the installation and removal of slotted bushes on HGV spring suspension.
  • Includes a 12 tonne hydraulic cylinder (supplied without hydraulic pump).
  • Installation protects the bush using the parallel working tension elements.
  • Suitable for use on the vehicle.
  • Ideal for use with Laser Hydraulic Hand Pump (Part No. 7861) & Air Powered Hydraulic Pump (Part No. 7862).

Typical Price:

£1619.26 exc VAT
£1943.11 inc VAT

Für Lagerbuchsen in der Lkw-Federung, Lieferung mit einem 12-Tonnen-Hydraulikzylinder, der für den Einsatz am Fahrzeug geeignet ist

Zusätzlichen Informationen

  • Zum Ein- und Ausbau von geschlitzten Lagerbuchsen der Lkw-Federung
  • Umfasst einen 12-Tonnen-Hydraulikzylinder, jedoch ohne Hydraulikpumpe
  • Die Montage schützt die Buchse mit den parallel arbeitenden Zugelementen
  • Geeignet für den Einsatz am Fahrzeug
  • Sicher und einfach zu bedienen

Typical Price:

£1619.26 exc VAT
£1943.11 inc VAT

Pour les coussinets de palier dans les suspensions de camions à ressorts fourni avec vérin hydraulique de 12 t adéquat pour une utilisation sur le véhicule

Information complémentaire

  • Pour l'installation de Silent-bloc sur les suspensions de camions à ressorts
  • Comprend un vérin hydraulique de 12 t mais fourni sans la pompe hydraulique
  • L'installation protège le coussinet en utilisant des éléments de tension parallèles
  • Convient pour une utilisation sur le véhicule
  • Sans danger et facile à utiliser

The road springs of many heavy goods vehicles are fitted with slotted bearing bushes which are constructed with a split steel outer casing bonded to the rubber inner section. Two steel end caps and the inner steel bearing tube make up the assembly. During safety inspections the condition of these bushes is carefully checked and if any wear is detected the bushes must be replaced. Removal and subsequent replacement of this type of bush is impossible without the correct equipment. This comprehensive kit from Laser Tools (part number 7432) uses a compact 12 tonne hydraulic ram that allows the operator to swiftly complete this very awkward job which is usually carried out in a limited access environment. The kit includes all fittings to extract and replace the bushes on Volvo FM12; Renault 430, 450 and 460; and MAN-TGA 410, 414 and 460 models.

Removal is straightforward; once set up, the hydraulic ram is connected to the workshop hydraulic pump (not included) and the bush is steadily drawn out into the extraction cup.

When fitting the new bush, great care has to be taken to prevent the bush from distorting when being forced into the spring eye. If this happens, this expensive bush can split and delaminate and be rendered unserviceable. They have to be pressed into the spring eye correctly and the kit includes special clamp blocks (for the three bush sizes that cover the listed applications) that compress the split bush and keep it parallel as it is pressed into the spring eye.

A great timesaver in the busy HGV workshop and available now from your local Laser Tools supplier.

 
Find a Local Stockist
Find
 
Search for an On-line Stockist